Most wonderful time of the year week4

Where did the summer go? Kids are back in school, with all the insanity that goes with it, vacations are a not-so-distant memory, and it is once again time to get busy with the important things in life...crafting for the holidays! Yay! All of September the Dream Team will be featuring all the new goodies we have for the "Most wonderful time of the year", the fall and winter holiday season. New stencil designs, new dies, and...brand new embossing folders featuring some of our top-selling designs, all to be found on-line through the Stencil with Style web-site, or your local papercrafting store.

I know I keep saying this is my favourite and thats my favourite but this weeks post has a few favourites.  The first is one of the new Dreamweaver Stencils the Tall Poinsettia (this will be one of my all time favourites) and the other things are the Molten Magic Technique using the stencil and lastly the use of patterned paper and cutting into it so that my design is tucked into the paper.

Here's my creation for this week:

This is what you will need:-

Dreamweaver Stencil LL3046 Tall poinsettia

Silver Embossing Paste

White card

Burgundy card

Patterned paper

Dreamweaver Metallic FX powders :- Forestry, Rose Berry, Plum Royale,Amber Gold, Kiwi.

Stencil brush

Palette knife

Low Tack Tape

Silver Mirri board

Heat Gun

Cleaning products for stencil

And this is how I created the card:

1 Take the Stencil and attached to a piece of white card on all 4 sides apply the silver paste, and remove stencil place in water for cleaning.  Take the Dreamweaver Metallic FX powders and using a stencil brush tap the powders over the paste design in the areas you want coloured.

2 Using a heat gun start to heat the design. I always give a quick blast of heat to the back of the card before concentrating on the front.  As the paste is heated it starts to blister and bubble.  If large bubble appear I tend to burst them so the there is no danger of them cracking and flaking off when the design is finished.

3 Cut all the matts and layers and with the layer of patterned paper cut around the design so that the stenciled design will tuck in. Put your card together.

4 You can add to the card by using ribbon around the spine.  I decided that I wanted mine to be clean and simple.

That is the card done, hope you like it, this is what the rest of the team have been creating this week.  Enjoy :  

                                          Dream It Up!

Wendy Price (GD)

Lyn Bernatovich

Louise Healy

Alison Heikkila

Kristine Reynolds

Pam Hornschu

Gill Wilson

Kristi Parker Van Doren

If you are in the UK or Europe and would like to purchase any of the products for the above project they are all available from The Stampman or your local Woodware Stockist

Thanks for stopping by

Gill

!-- start InLinkz script -->
    <div class='InLinkzContainer' id='438473' >
    <a rel='nofollow' href="http://new.inlinkz.com//luwpview.php?id=438473" title="click to view in an external page.">An InLinkz Link-up</a></div>
    <script type='text/javascript' src='http://static.inlinkz.com/cs2.js?v=007'></script>
<!-- end InLinkz script -->

September week 2

Where did the summer go? Kids are back in school, with all the insanity that goes with it, vacations are a not-so-distant memory, and it is once again time to get busy with the important things in life...crafting for the holidays! Yay! All of September the Dream Team will be featuring all the new goodies we have for the "Most wonderful time of the year", the fall and winter holiday season. New stencil designs, new dies, and...brand new embossing folders featuring some of our top-selling designs which are coming soon.

I don't know about you but I have so many cards to make I have to make cards quickly.  I think this is one of the more easy and quick ones that i have done. So here is my creation:-

This is what you will need:-
Dreamweaver Stocking dies DG692
Dreamweaver Quatrefoil Stencil LX7027
White card
Red Card Silver mirri card
White pearl card
Glossy white paste
Stampendous crystal glitter
A sentiment stamp of your choice I used  Woodware Clear Magic Stamp set FRS175

And this is what you do:-

1 Take a piece of white card and cover with a thin layer of white Glossy Paste, to give texture I simply used my palette knife to dab over the top of the paste to achieve slight 'peaks' and dimension.  I then scattered a good layer of Stampendous crystal glitter over this removed the excess and put this back in the pot.  The glossy, glitter piece was put to one side to dry completely.

2 Take a piece of red card and use the Quatrefoil stencil to emboss I used my Big Shot to do this. To add a little bit of shading or definition to the red embossed card I used a dark pink ink pad and the Strie technique

3 Take the large stocking die and cut out the bottom part  of the stocking from the red embossed card, and once the white glitter card is dry cut out the top part of the stocking from this.

4 Using a matt of white pearl card I placed the stocking onto this and made sure that I overlapped the top of the stocking with the bottom.

5 The last couple of steps were to put crystal self adhesive gems on to the embossed area of the stocking and to stamp the sentiment at the bottom.

There is my card quick and simple. 

The rest of the team have been busy working on more lovely projects, here is the list.  Enjoy.

Wendy Price (GD)

Dream It Up!

Lyn Bernatovich

Louise Healy

Alison Heikkila

Kristine Reynolds 

Pam Hornschu

Kristi Parker Van Doren 

Gill Wilson 

Of course, we have our monthly challenge for you to play along, so post your own holiday creations, and use the Inlinkz tool on the Dream It Up! blog, for a chance to win the prize at the end of the month.

If you are in the UK or Europe and would like to purchase any of the products for the above project they are all available from The Stampman

Thanks for stopping by and enjoy your crafting

Gill

An InLinkz Link-up

August as an adjective Week 4

Merriam-Webster defines august as, "marked by majestic dignity or grandeur", with synonyms such as, "dignified, distinguished, imposing, portly, solemn, staid, and stately". Now, I don't know just how dignified and stately the Dream Team can become for an entire month, but we are all going to give it a try! How about trying along with us, and linking YOUR creations to the inlinkz tool below for a chance to win the wildest stencil design your little heart is screaming for. 

I've still got Christmas on my mind following on from the collaboration with Woodware a couple of weeks ago.  I have lots of Christmas favourites from Dreamweaver stencils and I have used one of them for my creation this week.  'The Christmas Tree' can be used in numerous ways and using the various techniques that the Dreamweaver products lend themselves to I suppose the skys the limit.  For instance instead of doing the full size tree you could make it into smaller trees by simply omitting layers.  I decided I would go big.

Here is what you will need:-

White, black and silver mirri card

Matte black paste

Crackle paste

Decorative chalks

Dreamweaver Stencil LX7003

Woodware clear magic stamp set FRS175

Stencil brush or sponge dauber

Silver ink pad

Low tack tape

Palette knife or spreader

Equipment for cleaning and drying stencil

and here is what you do:-

1 Take a piece of white card and attach stencil on all 4 sides using low tack tape.  Apply black matte paste, remove stencil wash, clean and dry. Place paste design to one side to dry completely.

2 Re attach the stencil to the original paste piece and tack around all 4 sides, apply the crackle paste.  Remove stencil wash clean and dry, the design panel needs putting to one side and allowing to dry completely.  I left mine over night ( I'm over cautious).

3 Take either a stencil brush or a dauber and apply the decorative chalks over the whole tree. i didn't put the stencil back on as I wanted the backing card to take some of the chalk colour.  I you want a very sharp clean design then you can reapply the stencil and then apply the chalk.

4 The next step is to trim the white card down to just out side the stencil design, and to cut the matts and layers.

5 Stamp the message in the top corners using a silver ink pad. 

6 Put all the layers together and your card is complete.

This card does take a little longer with having the 2 layers of embossing paste, but I feel that it is worth it. I think it is quite elegant and fits the bill.

Heres what the rest of the team have been doing this week 

Dream It Up!

Lyn Bernatovich

Louise Healy

Alison Heikkila

Kristine Reynolds 

Pam Hornschu

Kristi Parker Van Doren 

Gill Wilson 

If you are in the UK or Europe and would like to purchase any of the products for the above project they are all available from The Stampman or your local Woodware Stockist and Notions Marketing in the USA..

Thanks for stopping by

Gill

An InLinkz Link-up

Woodware collaboration day 6

Yes! It's that time of year again! The time when we inspire crafters on both sides of the "pond" with a mix of bothDreamweaver and Woodware UK* products for the holidays! Six days, SIX, of beautiful, elegant, merry, cute, artsy, and craftsy projects to have you heading out to your local stores or internet sites to buy these goodies immediately!

Of course, there will be prizes as well. Three prize packages will be given to three commenters during this week's posts on the team's blogs, including five stencils and one nested die set. You can have an opportunity to win these goodies by leaving some holiday sweetness for each team member posting each day, to be one of the three winners for the week. Here are the team members that are inspiring you today:

Dream It Up!

Woodware UK

Kristine Reynolds

Jamie Martin

Pam Hornschu

Louise Healy

Lynn Mercurio

Lea Kimmel

Gill Wilson

Laura Drahozal 

Dorothy Adam

 Debs Frost

Alison Heikkila
Lyn Bernatovich

Well the final day of the Woodware and Dreamweaver collaboration has arrived, and I can say I have loved every minute of it, there has been so much inspiration and hopefully you will have some ideas of your Christmas cards for this year.

Todays card is the meaning of Christmas - 'The Nativity', and I have gone for quite simple.
.

This is what you will need:-

Dreamweaver stencil LL554

Versamark ink pad

Stampendous detail white embossing powder

Glitter card

Pale blue patterned paper

Woodware Clear Magic Stamp set FRS315

Dreamweaver stencil packaging

Black card

White card

Finger dauber

Heat gun

and this is how to create the card:-

Attach the stencil to the black card, and using a dauber and the Versamark ink pad apply the ink, make sure that you apply a good layer of ink.  Remove the stencil and cover the design with the Detail white embossing powder, remove any excess powder and heat the design with a heat gun.

The next step is to matt and layer the image and finally to stamp the greeting at the side, there are not too many stages to the card but its simple and shows the true meaning of Christmas. Hope you enjoy.

That is my card and my last for the week, the rest of the team have been working  and here are their projects.

If you are in the UK or Europe and would like to purchase any of the products for the above project they are all available from The Stampman or your local Woodware Stockist and Notions Marketing in the USA..

Thanks for stopping by and for all your lovely kind comments.  I think it's great to share ideas.

Gill

Wood ware collaboration day 5

Yes! It's that time of year again! The time when we inspire crafters on both sides of the "pond" with a mix of bothDreamweaver and Woodware UK* products for the holidays! Six days, SIX, of beautiful, elegant, merry, cute, artsy, and craftsy projects to have you heading out to your local stores or internet sites to buy these goodies immediately!

Of course, there will be prizes as well. Three prize packages will be given to three commenters during this week's posts on the team's blogs, including five stencils and one nested die set. You can have an opportunity to win these goodies by leaving some holiday sweetness for each team member posting each day, to be one of the three winners for the week. Here are the team members that are inspiring you today:

Dream It Up!

Woodware UK

Louise Healy

Pam Hornschu

Lynn Mercurio

Gill Wilson 

Siobhan the Recovering Stampaholic

 Debs Frost

Alison Heikkila 

The fifth day has arrived, and no Christmas would be complete without the mention of mistletoe, its all part of the traditional Christmas. I think we all a traditional Christmas and here is my 'traditional' project.

This what I used:-
Dreamweaver stencil Merry Christmas
Gold Embossing paste
Palette knife
Low tack tape
Quickie glue pen
Acrylic block
Stampendous Crystal Glitter
Colorbox Farmhouse ink pad
Red Tombow pen
Versafine Vintage sepia and smoked grey

and this is what you will do:-
Use a scrap of cream card and stamp the Mistletoe image towards the top of the card using Versafine black onyx.  Colouring the image was done as follows, the bow was coloured with the red tombow pen, the mistletoe leaves were coloured with the green ink on the ColorBox Farmhouse and a water brush, and the mistletoe berries were coloured with the smoke grey Versafine ink pad.  To complete the berries I coloured over the top with a quickie glue pen, once the ink had dried to clear I covered with the Stampendous crystal glitter and removed the excess back to the pot.

The last part of the panel was the Merry Christmas.  Take the stencil and attach to the panel with low tack tape on all 4 sides.  Apply the embossing paste using the palette knife.  Remove the stencil and put the panel to the side to dry, and wash the stencil.

Once the paste has completely dried put the card together and then using the rouging technique use a stencil brush and vintage sepia ink pad to tone the cream card down.

Theres your card, hope you like it.  The rest of the team have been creating for you. Here are the projects they have completed.

If you are in the UK or Europe and would like to purchase any of the products for the above project they are all available from The Stampman or your local Woodware Stockist and Notions Marketing in the USA..

Thanks for stopping by

Gill

Woodware collaboration day 4

Yes! It's that time of year again! The time when we inspire crafters on both sides of the "pond" with a mix of bothDreamweaver and Woodware UK* products for the holidays! Six days, SIX, of beautiful, elegant, merry, cute, artsy, and craftsy projects to have you heading out to your local stores or internet sites to buy these goodies immediately!

Of course, there will be prizes as well. Three prize packages will be given to three commenters during this week's posts on the team's blogs, including five stencils and one nested die set. You can have an opportunity to win these goodies by leaving some holiday sweetness for each team member posting each day, to be one of the three winners for the week. Here are the team members that are inspiring you today:

Dream It Up!

Woodware UK

Laura Drahozal

Pam Hornschu

Kristi Parker Van Doren

Kristine Reynolds 

Lyn Bernatovich

Louise Healy

Gill Wilson

Lea Kimmel

Crafty Debs

Debs Frost
 Alison Heikkila

Christmas is still on our minds here on the Woodware / Dreamweaver Collaboration.........my thought today is what would Christmas be without a Christmas Tree.   So of course my card had to have a Christmas Tree.

I thought that would use the Dreamweaver Dies , I wanted depth to my 'forest' and a stamped image.

This is what you will need:-
A5 sheet of white card
Dreamweaver Tree Line  Die DG745
Gold mirri card
Black card
Woodware Clear Magic JGS356 
Ribbon
Versamark ink pad
Dreamweaver Metallic FX - goldfinch
Stencil Brush

and this how to create the card:-

To create the Tree Line background cut one black and one gold mirri card using the Tree Line Die.  Cut both of these in half, this means that you can alter the width of you tree line ( the gap that is created will be covered by the stamped image. Layer the two pieces so that there is shadow showing.

The centre panel is created by stamping the tree image using the Versamark ink pad and apply the Dreamweaver Metallic mica powder with a stencil brush over the stamped image.  The mica powder attaches to the Versamark as this is a sticky ink pad.  Trim the black panel down and matt on to gold mirri card and leave only a very fine border.

The next step is to apply the ribbon and finally stamp the sentiment in the bottom corners of the card.

There's your card quick and simple, if you have a lot of cards to make these are really quick.

The rest of the team have been busy as well today.......check out what they have been doing:-

If you are in the UK or Europe and would like to purchase any of the products for the above project they are all available from The Stampman or your local Woodware Stockist and Notions Marketing in the USA..

Thanks for stopping by

Gill